Friday, 17 December 2010

more pinhole photography research


steve irvine believes that pinhole photography opens lots of creative possibilities and learning experiences.

pinhole photographers research

all these photos were created using an oatmeal box pinhole camera. all phoots were created by stewart woodruff.




creating a pinhole camera.

getting started; in order to create your pinhole camera you need to find a tin, tube or box of any kind (for example a pringles tube) to be your camera body. NOTE; the lighter your camera the easier it is to transport.

Once you have selected your camera body, you must paint the inside black or line it with black paper to stop light reflection.

you need to make a pinhole in the box/tube, this will be your shutter. on the in side of the box/tube on the opposite side to the pinhole is where you place your photographic paper. on the outside of the box, you must place a pice of tape or make a flap to cover the pinhole to create a shutter.

when you put the lid on the box/tin, you may need to put tape around it because light may get into it and you don't want that.

now your camera is ready to take pictures:)

pinhole photography

about the camera;
the camera is made out of some form of box or tube, eg; a pringles tube, a match box or old sweet tin. the inside of the box/tube is painted black so that no light will effect the photo when its being taken. The camera hole is created by a pin which is pushed through the box/tube. Over the front of the hole is a cover which acts as the shutter on the camera. In order to get a good photo you must work out the equation. F-stop= distance from pinhole to paper (mm) / diameter of pinhole (mm) for example: pringle tin.  f-stop= 72/0.8  f-stop= f-90. this means it will take about 90 seconds to produce a photo. the time differs for inside and out. For example if you are take a photo inside you should double the f-stop time.